Parts

Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g

From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. Deep center lugs aggressively claw into unconsolidated snow for extreme acceleration and braking traction. Super tall side lugs dig into loose snow to provide predictable and confident cornering. Encounter sheer ice on your ride and Wrathchild’s concave studs tear into the surface. - Deep, aggressive lugs dig into snow - Tall side lugs provide cornering confidence - 252 concave studs tear into slick surfaces - Tubeless ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss

The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability. - Carbide studs grip ice - Braced side lugs improve cornering - Tubeless Ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

The S-works Power Saddle with Mirror technology is the perfect reflection of you. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-kind honeycomb structure that offers superior sit-bone support and comfort. - FACT carbon fiber shell is flex-tuned for support and ride compliance. - Ultra-light, strong, and oversized FACT carbon rails - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight 190g - Size 155mm / Weight: 194g - NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails.

- Tailored to the latest lightweight and uber-capable trail bikes, the all-new Deluxe Ultimate offers a fully-checked damper design featuring Low Speed Compression adjustment and optimal traction control tuning. - Featuring the new DebonAir+ air spring with new air can options, a wider range of rebound adjustment, more tuning capabilities than ever before, and increased bushing overlap for improved small bump performance and grip.

ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.

Elevating the shift, expanding the capable, the X01 Eagle derailleur features an updated cage architecture to provide better chain management than ever. The X01 Eagle rear derailleur works with the new 10-52T cassettes and is backward-compatible with 10-50T options, as well. - Updated cage provides better chain retention and more precise shifts - Backward-compatible design works with 10-50T and 10-52T cassettes

The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all. - Titanium wings to reduce weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 6 adjustable pins per side for grip - Traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - 52mm q-factor for maneuverability on tight trails - Hex alloy endcap for durability - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system

True competitors are always looking for a performance advantage — a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets mean simplicity, compatibility, and durability. Specifications: - CRANK ARM LENGTH: 165mm, 170mm, 175mm - BB SPINDLE INTERFACE: DUB - BB COMPATIBILITY: All SRAM MTB WIDE DUB BBs, DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - SPEEDS: 12 - CHAINRING MATERIAL: No rings - BOLT CIRCLE DIAMETER (BCD): Direct Mount (DM) - CHAINLINE: 55.0mm, n/a - CHAINRING SIZE: No rings

Do you ride in a wide range of winter conditions? Dillinger is one of the best winter fat bike tires for mixed conditions, thanks to its balance of speed and traction to help you stick to your line without slowing you down. And with optional studs, you’ll never slip, slide, or lose control on ice. Details: - Fast-rolling center tread for carrying speed - Large, braced side lugs for predictable cornering performance - Available with 168 Large Concave Carbide Aluminum Studs, 168 Carbide Steel Studs, or a custom-studdable tread for tuning your own stud pattern - 60 TPI and 120 TPI casing options - Tubeless-ready for supple ride quality, more grip, and weight savings - We design 45NRTH tires for extreme winter cycling applications. We do not recommend using this product with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Dillinger 4 is a fast traction studded fat bike tire. The tightly spaced center tread rolls quickly, while taller, braced side lugs improve cornering in snowy conditions. Carefully positioned studs allow for railing icy, off-camber singletrack with confidence and control. - Braced side lugs for improved cornering - Directional center lugs for rolling speed and braking traction - Replacement studs and stud insertion tool sold separately - Custom studdable up to 252 studs - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant,integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - BB not included

Whisky's all-carbon Spano Drop Handlebar is designed to give gravel and all-road riders the most natural hand positions anywhere on the bar. A multi-stage flare puts the hoods at an optimal angle for comfort while maximizing control through the drops. The bar's flat top promotes flex and offers relief from rough surfaces, and its 31.8 clamp diameter with 90mm width allows compatibility with bar-mounted accessories, including aero bars. - Available in five widths, measured center-to-center at the hoods: 40, 42, 44, 46, 48cm - Compound flare — 12 degrees at the hoods and 20 degrees through the drops - Drop/Reach: 100mm/68mm - 31.8mm clamp diameter Specifications: - Bar Top Style: Flat - Width Measurement: Center - Bar Clamp Diameter (mm): 31.8 - Accessory Mount Diameter: 31.8 - Bar Reach (mm): 68 - Material: Carbon - Clip-on Compatible: Yes - Bar Drop (mm): 100 - Flare: 20 - Defined Color: Black - Weight: 236 - Drop Bend Style: Compact

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The ITA for SRAM DUB Road comes in two bearing options. The first option is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second option is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: Italian BB - Opening diameter: Threaded - Shell width: 70mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacer tube

ULTIMATE PERFORMANCE Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°).

- Ceramic bottom bracket for DUB spindle cranks Specs: - BB Shell Type: BB92 - BB Shell Width: 89/92mm - BB Bearing: Ceramic - Crank Spindle Diameter: 28.99mm - Interface: DUB - Cup Diameter: 41mm

With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm

The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down. - Shorter overall post length - Stealth Internal cable routing

One rear derailleur to rule them all. The SRAM Force eTap AXS rear derailleur is designed for both 1x and 2x systems. It capitalizes on X-Range gearing technology for enhanced range and chain management and features larger pulleys for improved durability and efficiency. Strong, smooth, quiet and AXS enabled. - SRAM AXS enabled, allowing easy personalization - Orbit chain management technology keeps the drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Larger X-SYNC pulleys for increased durability and efficiency - NOTE: Does not include eTap battery. Compatible with existing eTap batteries.

The svelte strength of carbon fiber with the swagger of heavy metal. The Descendant Carbon DUB crankset uses a proprietary TruVativ carbon construction process, delivering a crankset light enough for XC, yet durable enough for Enduro. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon construction for lightweight durability - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

The Campagnolo Chorus Shift Lever Set features an ergonomic lever design and efficient shifting performance. - Ultra-Shift mechanism controls the 12-speed rear derailleur, letting the rider shift up by up to 3 sprockets and down by up to 5 sprockets in a single movement - Campagnolo's one-lever-one-action philosophy ensures no-confusion control, regardless of the cycling conditions or the cyclist's position - The various positions possible for Ergopower controls mean they adapt better to different hand sizes - Vari-cushion grip offer good, safe grip when standing pedaling or when leaning high on the handlebars - Brake lever with double curve ensures maximum safety in all riding positions: whether actioned from the handlebar curve or the controls Specifications: - Front Der/Shifter Compatibility: Campy Centaur/Potenza/Chorus/Record/Super Record 2015+ - Brake Lever Actuation: Short Pull - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ , Campy Centaur/Potenza/Chorus/Record/Super Record 2015+ - Adjustable Reach: Yes - Drivetrain Speeds: 12 - Weight: 364g

Selle Italia SLR Boost saddles feature a slight rise on the back and a micro-perforated cover that helps maintain the ideal sitting position, ensuring proper support of the ischial bones. The SLR Boost has a redesigned tip for further comfort in the thrust phase. Moreover, adjustments become easier, thanks to a glossy black line applied to the lower part of the body that indicates the position of the BRP (Biomechanical Reference Point), the point where the saddle reaches a width of 70mm and from which to measure the parameters useful for correct positioning. - Gender: Women's - Rail Material: Titanium - Clamp Style: Standard Rails - Material: Synthetic - Length: 248mm - Width: 130mm - Weight: 198g

The Silverado is one of WTB’s most iconic and revered saddle shapes. Lightweight and slim, the design oozes speed while proving to be incredibly comfortable. Ride a Silverado and you’ll quickly know what everyone’s raving about. - Long, tapered nose and flatter platform provide ample real estate for shifting positions - Optimized padding-to-weight ratio make the Silverado a hit across all disciplines, including road - Carbon rails, 7mm x 9mm

Developed and designed entirely by CeramicSpeed, the Oversized Pulley Wheel (OSPW) System for Shimano 9000/6800 provides the ultimate optimization of your bicycle's drivetrain. This OSPW System features a set of 17-tooth aluminum Pulley Wheels housed in a specially designed polyamide (PA) and carbon cage. The upper and lower 17-tooth oversized aluminum pulley wheels come fitted with either standard or coated CeramicSpeed Bearings. The Oversized Pulley Wheel (OSPW) System is the product of choice by many of the world's leading cycling teams and triathletes. This specific system is compatible with Ultegra 6700/6770/6800/6870 mechanical and Di2 rear derailleurs and Dura Ace 7900/7970/9000/9070 mechanical and Di2 rear derailleurs. It is not compatible with Shimano Dura-Ace 9100/9150 and Ultegra 8000 series rear derailleurs. For those rear derailleurs you will need a OSPW System for Shimano 9100 series. The system is compatible with up to a 28-tooth cassette on most bikes, depending on derailleur hanger. The typical overall power savings of the OSPW System for Shimano 9000/6800 is 30%-60% over a stock setup, and the oversized pulley wheels have a lifespan that is 3-5 times longer than the commonly used standard pulleys on the market. In The Box: - A complete 17-tooth OSPW System - CeramicSpeed bearing oil in 15ml dropper bottle

Our Box Two tier's mission in life is to deliver performance similar to the Box One but without its exotic (and costly) features. With the Single Shift E-Bike Groupset you still get the Tri-Pack™ Clutch in our derailleur only it isn't adjustable. The cassette's 12-50T range is optimized for E-Bikes. The action on the shifter is limited to one downshift per lever swing. The chain boasts the same unique ability to mate with a wide/narrow chainring except you give up the trick DLC top coat. You're hardly shortchanging yourself with Box Two. INCLUDES - Box Two Prime 9 Single Shift Shifter - Box Two Prime 9 X-Wide Rear Derailleur - Box Two Prime 9 12-50T E-Bike Cassette - Box Two Prime 9 126L Chain Nickel - Box One Shift Cable & Housing Kit

The EC90 SLX is comprised of advanced carbon construction for Easton’s lightest road bar to-date. This handlebar features Easton’s new MCD shape technology for a unique ride quality and comfort. TaperWall technology and Intelligent Flexibility team up to deliver a perfectly tuned bar that weighs just 195-grams. Shimano, SRAM or Campagnolo levers can be positioned for a smooth transition on the tops and into the bend, with cables wrapped neatly in the bar’s designed recesses. - Bar weight: 195mm (42cm) - Width (center-to-center): 38cm, 40cm, 42cm, 44cm, 46cm - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 125mm - Materials: EC90 carbon

The Hellbender 110 Bottom Bracket provides an incredible mix of performance and longevity through the inclusion of Enduro XD-15 ceramic bearings. These bearings feature nitrogen-infused stainless steel races that will not rust or corrode paired with Silicon Nitride ceramic balls. - BB30 for 30mm Spindles - Lifetime Guarantee

The Hellbender 110 Bottom Bracket provides an incredible mix of performance and longevity through the inclusion of Enduro XD-15 ceramic bearings. These bearings feature nitrogen infused stainless steel races that will not rust or corrode paired with Silicon Nitride ceramic balls. - Enduro XD-15 ceramic ball bearings are made from pure silicon nitride material with extreme high density and uniform compaction - The race material is an advanced stainless alloy that is nitrogen infused and will not rust or corrode - Dual stage anodize black and gold machined aluminum bottom bracket cups - Kluber NBU52 grease runs better and smoother with time and is highly resistant to being washed out - Designed for use with 30mm spindles